Choosing Track for an O Gauge Model Railroad Layout

O Gauge Model Railroad Track Styles

What makes O gauge model railroad track different?

So, you want to add track to the oval that came with your O gauge train set. You visit a local hobby store to buy more, and you see a dizzying array of track that looks vastly different, all of it labeled O gauge. What’s up with that?

There are a number of manufacturers of O gauge model railroad track, and some manufacture more than one style of track. All O gauge track features the same width between rails (the “gauge” in “O gauge” refers to the width between the outer rails) so your O gauge trains will run on any manufacturer’s track, but not all manufacturers’ track will work together well. Each manufacturer has a method of joining track pieces together, so to use track from different manufacturers often requires a special adapter piece.

The easiest thing to do is just buy the same brand and type of track as your train set. Modern O gauge train sets come with easy to use “all-in-one” track (a definition of that below in “styles of track”) that is great for beginners that don’t have a table on which to run their trains. It locks together positively, and can be used on carpeted floors.

However, if you are just getting started, and you only have enough track to make a simple loop, it’s a lot easier to switch track brands now, rather than later, after you have bought hundreds of dollars worth of additional track (see what expanding your layout can cost on our Comparing Prices of O Gauge Track Page). Ask you local hobby shop about their opinions of the various track brands and styles available. They all have pros and cons, so this is a good time to study them and see if you want to change.

“Wait, the guy at the hobby shop said something about ‘O-27 gauge track.’ What’s the difference between O gauge and O-27 gauge?”

As my friends from New York City would say, “Fughetaboutit.” Really. Don’t worry about it unless you are buying “old-school” tubular track (see more about tubular track below).

But, if you can’t let it go, we’ve devoted an entire page to this question. Go to our O Gauge vs. O-27 Gauge page, and when you’re done, there’s a link right back to this page. We’ll see you back here in a couple minutes.

You’re back? O.K., lets dive into what makes O gauge track different.

Styles of Track

There are two basic styles of O gauge model railroad track:

All-in-one O Gauge Track

The newest style can be termed “all-in-one” track. This track has an integrated plastic base that is designed to look like a ballasted railroad roadbed. Lionel FastTrack and MTH RealTrax are examples of this style of track. The table at the bottom of the page compares the variety of sizes of curved, straight and switch tracks offered by Lionel FastTrack and MTH RealTrax, as well as non-integrated track brands.

Non-integrated O Gauge Track

O gauge, model railroad, track, O-27, Lionel
Lionel “standard” O gauge tubular track has changed little in the century it has been available.

All other track, no matter what other differences it may have, do not have an integrated roadbed. These tracks range from old-school tin-plated tubular track offered by Lionel to more realistic looking tubular track that has realistic ties and black center rails such as Gargraves “Phantom Line,” to very realistic solid rail track, such at Atlas’ 21st Century Track.These non-integrated track brands have differences in what straight, curved, and switch tracks are offered. Compare them in the table at the bottom of the page.

Differences Between All-in-One and Non-integrated Track

  • All-in-one track tends to be more expensive than non-integrated track, although at the high end, Atlas track is comparable in price to all-in-one track (see our Track Price Comparison page).
  • All-in-one track is (somewhat) more realistic looking out of the box. However, Gargraves and Atlas track look more realistic when laid on a cork roadbed and ballasted, but that’s also a lot more laborious than just clicking Lionel FastTrack or MTH RealTrax together.
  • All-in-one track tends to lock together better than non-integrated track, and the integrated plastic roadbed makes it a better choice for a floor railroad, especially one on a carpeted right-of-way.
  • Non-integrated track is usually less expensive, although Lionel “standard” O gauge tubular track switches* can be pricier than either than all-in-one, or other non-integrated track switches by Gargraves or Atlas (see our Track Price Comparison page).
  • All-in-one track can be noisy due to the hollow plastic roadbed, although non-integrated track can be noisy as well, if not mounted on a sound-deadening roadbed. A lack of a sound-deadening material between either style of track and the plywood surface of the train table results in the amplification of the rumble of all those metal wheels on metal rails into a deafening roar.

*Because there are few good reasons for a newcomer to choose Lionel “standard” O gauge tubular track over O-27 tubular track, we didn’t even include it in the table below. It’s only real advantage is 72″ curves and 72″ switches, both of which can be easily replaced with components compatible with O-27 tubular track.

Differences in non-integrated O gauge track

At the lower end of the range of non-integrated O gauge track, little has changed in the century it has been available. Lionel’s O gauge and O-27 gauge tubular track is made from tin-plated steel that is subject to rust if exposed to moisture.

O gauge, O-27, model railroad, track, Gargraves, layout, plans
Realistic ties and a blackened center rail make Gargraves track a step up from “old school” tubular track.

Gargraves and Ross tubular track offer a step up in realism from Lionel tubular track. They both feature protoypical size closely-spaced wood or plastic ties that look much more realistic than the metal ties on Lionel tubular track. Also, the center rail on Gargraves’ “Phantom Line” and Ross track has been chemically blackened to make it more inconspicuous. Gargraves also offers track made from stainless steel that is not subject to rust if used outdoors.

The plastic or wood ties of Gargraves and Ross track offer an advantage in that the two outside rails are insulated from each other, where the metal ties of Lionel track provide an electrical connection between the outer rails. If you need to insulate an outer rail with Lionel tubular track (there are some reasons you might want to do so – we’ll talk about these later), you have to buy and insulated track section, or perform a little track surgery to alter a regular piece of track.

O gauge, O-27, model railroad, track, Atlas, 21st Century, nickel silver
Atlas 21st Century track offers solid rails with a realistic cross section

The high-end of non-integrated track would have to be Atlas 21st Century Track. It has very realistic ties, and features a solid nickel-silver rail with a very realistic-looking cross section. It also has a blackened center rail.

The joining system of Atlas track makes it more difficult to simply cut pieces to fit as you can with Lionel, Gargraves, or Ross non-integrated track, but to make up for that, they offer a wide array of short straight and curved pieces.

Ross Custom Switches, O gauge, O-27, model railroad, track, switch, high-quality
Ross Custom Switches offers with widest variety of O gauge switches and crossings.

Ross and Gargraves tubular tracks connect to each other easily, and adapter pins make it easy to connect them to Lionel tubular track, so if you have a pile of tubular track, you can expand with Gargraves or Ross without having to junk your Lionel tubular track. You can also mate these tubular tracks to Atlas or the all-in-one style track with an adapter track.

When you look at the table at the bottom of the page, you can see that Ross has the greatest selection of switches and crossover tracks of any brand, whether tubular or all-in-one. Ross has a great reputation for quality, but that quality also comes with a price. Check our our Track Price Comparison page to look at all the brands side-to-side.

Gargraves and Atlas both offer a wide selection of switches, as do the all-in-one brands Lionel Fastrack and MTH RealTrax.

Gargraves beats out everybody for the variety of curves, just as Ross does with switches.

The two all-in-one brands are fairly equal, although Lionel Fastrack offers a wider variety of short pieces. MTH RealTrax, however, offers exotic curved switches that can save a lot of space.

It all boils down to personal choice. There is no single winner among the track types, however, as I said, for beginners, the all-in-one style tracks probably have more pros than cons.

Below is a table of the main brands of O gauge track available, and what pieces of track each manufacturer offers:

Manufacturer:LionelLionelMTHAtlasGargravesRoss Custom
Brand:O-27 GaugeFastrackRealTrax21st CenturyPhantom LineSuper Line
Track Type:TubularAll-in-OneAll-in-OneSolid RailTubularTubular
Curved      
Minimum27” (1)36” (2)31” (1)27” (1)32”31”
36”Yes (3)
42”YesYes (1)45” (3)YesYes
48”Yes (2)
54”YesYes (1)Yes (1)YesYes
60”Yes63”63”64”
72”Yes (4)Yes (1)Yes (1)Yes (1)YesYes
84”Yes82”81” (5)80”80”
90”Yes89”96”
99”Yes106”104”
108”Yes113”112”
Other    Yes 
Straight      
Standard8 ¾”10”10”10”10”10”
1 1/4”Yes
1 3/8” StraightYes
1 3/4” StraightYesYes
3.5”Yes3”3”
4 1/2”4 3/8”Yes4 1/4”Yes
5”YesYes
5 1/2”YesYes6.2”
Extra-Long35”30”30”40”24.8”, 37”14.5”, 29”
FlexYesYesYes
Crossovers      
11 DegreeYes
22.5 DegreeYesYesYes
30 DegreeYesYes
45 DegreeYesYesYesYesYes
60 DegreeYesYes
90 DegreeYesYesYesYesYesYes
Switches      
27” ManualYes
27” RemoteYes
31” RemoteYesYes
36” ManualYes
36” RemoteYesYes
42” RemoteYesYes45”YesYes
48” RemoteYes
54” RemoteYesYesYesYes
60” RemoteYes64”
72” RemoteYesYesYesYesYes
72” WyeYesYesYesYesYes
Other  42”/31” Curve 100”80”, 96”
Other  72”/54” Curve  Many

Notes:

(1) ½ curve track available
(2) ½ and ¼ curve track available
(3) ¼ curve track available
(4) O-27 72” curves discontinued, may still be available
(5) 1/3 curve track available

Please Support FreeModelRailroadPlans.com

FreeModelRailroadPlans.com is entirely user supported. If you find something of value here, please “pay it forward” and help us keep the site operating by a secure donation through PayPal (PayPal account is not required), or by shopping with our advertisers.

Thank you for your support!


 

How Valuable to You is FreeModelRailroadPlans.com?



4 thoughts on “Choosing Track for an O Gauge Model Railroad Layout”

  1. CALL ME OLD FASHION, BUT I HAVE BEEN USING LIONEL “O” GAUGE TUBULAR SINCE THE 50’S. I HAVE SEEN ALL THE OTHER TRACK SYSTEMS, MTH, GG, ROSS, FASTRACK, YOU NAME IT AND THEY ARE ALL GREAT SYSTEMS. FOR ME, I LIKE THE HANDS ON STUFF……. PUTTING ROADBED IN, BALLAST, WOOD TIES UNDER THE TRACK, ETC. WHAT EVER YOU ARE HAPPY WITH, THAT IS WHAT YOU STAY WITH. THANKS FOR LISTENING. AL

    1. Lionel makes a transition piece to go from tubular track to Fastrack. The only thing you have to watch out for is the switches. Standard tubular O gauge switches are 31″ diameter curve and FasTrack are 36″ diameter. Lionel now offers 31″ switches to match tubular O gauge track.

Leave a Reply to James Hitchcock Cancel reply

Your email address will not be published. Required fields are marked *